First TURN IT OFF RIGHT AWAY AND KEEP IT OFF!!!
I can’t stress that enough.
Here’s what I did.
Take the whole thing apart (you may need a special tool called a Torx Driver, for that you’ll need to go to your local Home Depot). After each piece is removed wrap it in a napkin or paper towel. There will be some places where you won’t be able to reach with a napkin or paper towel, for those hard to reach places I used a hair drier to evaporate the water. Do not hold the components in your hand while you do this, place it on a hard surface and wait until the piece cools off before picking it up. Skin will burn much sooner than water will evaporate.
This worked for me, I hope it works for you too.